Xerox FaxCentre 2218 System Administration Manual

Also see for 2218 - FaxCentre B/W Laser: Voluntary product accessibility template User guide Quick reference Service manual Service manual

Contents

Xerox FaxCentre 2218 System Administration Manual Manual pdf 74 page image

Page 7-14 Xerox WorkCentre 4118 and FaxCentre 2218 System Administration GuideNetwork Installation Using CentreWare Internet Services LPR/LPDUse these instructions to enable or disable LPR/LPD using CentreWare Internet Services.Installation ProcedureThere are two stages required to install the device on a LPR/LPD network using CentreWareInternet Services:¾ Configure the WorkCentre 4118 / FaxCentre 2218This procedure explains how to use CentreWare Internet Services toconfigure the device.¾ Test PrintA print job should be submitted to ensure the device has been installed andconfigured correctly.Configure the WorkCentre 4118 / FaxCentre 2218To complete the installation of the device, perform these steps:¾ Open CentreWare Internet Services (see Accessing CentreWare Internet Services onpage 7-4).¾ At the CentreWare Internet Services Home Page for the WorkCentre 4118 / FaxCentre2218, select the [Properties] tab.¾ Select the plus symbol [+] to the left of the Connectivity folder in the Properties frame, andthen select the [+] symbol to the left of the Protocols folder.¾ In the Properties frame, within the Protocols folder, select [LPR/LPD].¾ Select the checkbox to enable LPR/LPD.Enter the [Port Number].NOTE: While you can change the port number at which the WorkCentre 4118 / FaxCentre2218 will accept LPR print jobs, it is recommended that you do this ONLY with extremecaution as most LPR spoolers are set to send print jobs to the default port number, 515.¾ Click the [Apply] button to implement any changes.123456