Page 7-16 Xerox WorkCentre 4118 and FaxCentre 2218 System Administration GuideNetwork Installation Using CentreWare Internet Services Raw TCP/IP PrintingUse these instructions to enable or disable Raw Printing using CentreWare Internet Services.Installation ProcedureThere are two stages required to install the device on an Raw TCP/IP printing network usingCentreWare Internet Services:¾ Configure the WorkCentre 4118 / FaxCentre 2218This procedure explains how to use CentreWare Internet Services toconfigure the device.¾ Test PrintA print job should be submitted to ensure the device has been installed andconfigured correctly.Configure the WorkCentre 4118 / FaxCentre 2218To complete the installation of the WorkCentre 4118 / FaxCentre 2218, perform these steps:¾ Open CentreWare Internet Services (see Accessing CentreWare Internet Services onpage 7-4).¾ At the CentreWare Internet Services Home Page for the WorkCentre 4118 / FaxCentre2218, select the [Properties] tab.¾ Select the plus symbol [+] to the left of the Connectivity folder in the Properties frame, andthen select the [+] symbol to the left of the Protocols folder.¾ Select [Raw TCP/IP Printing].Select the checkbox to enable Raw TCP/IP Printing.Enter the required port number.NOTE: While you can change the port number at which the WorkCentre 4118 / FaxCentre2218 will accept RAW print jobs, it is recommended that you use the default port, 9100. this isthe industry standard¾ Click the [Apply] button to implement any changes.NOTE: Click the [Undo] button to cancel any changes made and return to the previousvalues.12345
