Xerox FreeFlow 665 Software Manual

Also see for 665: User guide System administrator guide Release note

INTRODUCTION C USTOMER SOFTWARE R ELEASE D OCUMENT1-6 X EROX FREE F LOW ® MAKEREADYOptional hardware componentsTable 1-4 lists the optional hardware components available withFreeFlow Makeready.Table 1-4. Optional hardware componentsHardware component DescriptionSony Magneto-optical drive (MOD) This is an optical storage device that allows up to 23 GB of localdocument storage and retrieval. Two MOD devices may beconnected to one FreeFlow system.FreeFlow supports the following MOD devices:• Sony 2.6GB MOD• Sony 5.2GB MOD• Sony 9.1GB MODRedundant Array of IndependentDisks (RAID)FreeFlow supports the following optional high capacity RAIDdevices:• Baydel Storage and Backup SubSystem, Model Number1559-PCI-221L. This solution has a minimum capacity of560 GB scalable to 2.2 TB (includes Exabyte 221L TapeLibrary).NOTE: This is an optional high capacity storage andbackup solution used to enable high capacity storage andtape system backup capabilities.• SafeStor 500 GB RAID, Model Number XRX-2PSQX-651-U4-3• SafeStor 1 TB RAID, Model Number XRX-2PSQX-651-U4-6NOTE: For more information on any of the optional highcapacity RAID devices, contact your Xerox representative.A maximum of two RAID devices are supported with FreeFlow.Sony AIT Autoloader tape library This Autoloader tape library is used for high capacity backupneeds, such as backing up the RAID devices.FreeFlow supports the following Sony AIT Autoloader externaltape libraries:• Sony AIT-1 Autoloader• Sony AIT-2 Autoloader• Sony AIT-3/LIB-D81 Autoloader, Model Number BNAAIT3NOTE: This is an optional tape library used for highcapacity backup needs.For more information on the Sony AIT-3/LIB-D81Autoloader tape library, contact your Xerox representative.