Control Panel MenusPhaser 6140 Color Laser PrinterUser Guide100USB Setup MenuUse this menu to configure the USB port status.Protocol When a protocol is set to Enable, it can be used. When set to Disable, itcannot be used.• LPR• Port 9100• IPP• SMB TCP/IP• SMB NetBEUI• FTP• WSD• SNMP• Email Alerts• CentreWare IS• Bonjour (mDNS)Host Access List Limits the IP addresses that can access this printer.Reset Defaults Resets all network settings back to their factory defaults.Adobe Protocol Specifies the PostScript communication protocol to use:• Standard• BCP• TBCP• Binary• AutoItem DescriptionPort Status Use to enable or disable the USB port status. This port must be enabled foryou to print to a USB-connected printer.• Enable• DisableAdobe Protocol Specifies the PostScript communication protocol to use:• Standard• BCP• TBCP• Binary• AutoItem Description
