PrintingPhaser 6140 Color Laser PrinterUser Guide55Loading PaperThis section includes:• Loading Paper in Tray 1 on page 55• Loading Paper in the Manual Feed Slot on page 57• Loading Paper in the 250-Sheet Feeder (Tray 2) on page 59Loading Paper in Tray 1You can use Tray 1 for a wide variety of media, including:• Plain paper• Card stock• Labels• Envelopes• Glossy paper• Pre-printed paper (paper already printed on one side)• Custom-size paperFor a more complete list of paper types and sizes usable in Tray 1, see Usable Paper on page 52.Make sure of the following points when loading paper into Tray 1:• You can load up to 250 sheets or a stack of paper (65–220 gms / 17–40 lb. Bond, 40–80 lb. Cover)less than 15 mm high (0.60 in.).• Tray 1 accepts print media within the following dimensions:• Width: 76.2–216 mm (3–8.5 in.)• Length:127–355.6 mm (5–14 in.)• For automatic 2-sided printing, you can load media in the range of 60–105 g/m 2 (16–28 lb.Bond).• Do not load different types of paper at the same time.• To print high quality, use high-quality paper intended for laser printers.• Do not remove or add paper to Tray 1 during printing or if there is still paper in the tray. Doing somay cause a paper jam. Remove the paper, align it with the new paper and insert both into the traytogether.• Do not put any objects other than paper on Tray 1. Also, do not push or force down Tray 1.• Always load paper short-edge feed first.For more paper usage guidelines, see Supported Paper and Media on page 50.
