Control Panel MenusPhaser 6140 Color Laser PrinterUser Guide104PCL Setup MenuUse this menu to configure settings for the Printer Command Language (PCL). The printer’s PCL driveris used for applications requiring PCL. For PCL printer driver options, see Printing Options for WindowsPCL Driver on page 68.Drum Refresh Helps improve imaging unit performance after overexposure to light.Init Print Meter Initialize Print Meter. Resets the Print Meter.Initialize NVM Resets the settings in the nonvolatile memory (NVM), except for thenetwork settings, to their defaults. NVM is memory that stores the printersettings even after the power is turned off. After selecting this option andrestarting the printer, all the menu parameters are reset to their defaultvalues.Notes:• You cannot set this during printing.• After changing this setting, turn off the printer and then turnit on again to activate the change.Clear Storage Deletes documents stored in the printer’s RAM.Reset Fuser Resets the fuser life counter to the starting point (0).Item DescriptionPaper Tray Specifies the paper tray to use when the Paper Tray setting in the PCLprinter driver is set to Auto Select.• Auto (default)• Tray 1• Tray 2 (optional; if installed)• Manual Feed SlotPaper Size Specifies the default paper size to print.Orientation Specifies the default paper orientation:• Portrait (default)• Landscape2-Sided Specifies 2-sided printing settings:• 2-Sided Print: Specifies whether to perform 2-sided printing. Thedefault is Off.• Binding Edge: Specifies the binding direction from Flip Long Edge(default) or Flip Short Edge.Font Specifies the font to use. The default font is Courier.Item Description