April 20106-41Phaser 3635MFP/WorkCentre 3550 dC132, dC305General Procedures/Information• Fax Job NVM• Fax Configuration NVM• Fax SA/KO Settings NVM5. Switch off the machine, then switch on the machine.NVM Initialization - Fax Procedure (3550)1. Enter diagnostics, GP 1 Diagnostics Entry.2. Select Fax Diagnostics and press the OK key.3. Select DC132 NVM Initialization - Fax and press the OK key.4. Select Yes and press the OK key to confirm initialization of the NVM values. All Fax NVMwill be reset.dC305 UI TestPurposeTo initiate component testing of the local UI. This function also provides a means to test the UImemory and to restart the local UI.DescriptionRefer to GP 12 User Interface Tests Description.ProcedureGo to the relevant procedure:• 3635• 355036351. Enter diagnostics, GP 1 Diagnostics Entry.2. Select, Diagnostics Routines, Copier Routines, dC305 UI Tests.3. Touch the appropriate test button.4. Touch Start Test and follow the on-screen instructions.35501. Enter diagnostics, GP 1 Diagnostics Entry.2. Select dC305 UI Tests.3. Select the complete panel or reduced panel test.4. Press the OK key and follow the on-screen instructions.Table 2 Fax NVMFax file type Category Kill AllAll FaxDirectoriesFaxJobNVMFaxConfigurationNVMFax SA/KOSettingsNVMDial Directories Y YGroup Directories Y YJunk Directories Y YLogo Directories Y YMailbox Directories Y YPoll Directories Y YJob Sets Y YJobs Y YImage Y YBitmaps Y YJob ID Y YMailbox Y YAlarm Y YFax Protocol Trace Y YProtocol Records Y YContainer Versions YFAX NVM Configuration YFax NVM SA/KO Settings Y
