Xerox Phaser 3635MFP Service Manual

Also see for 3635MFP - Phaser B/W Laser: Features Brochure & specs User guide User guide Quick use guide

Contents

Xerox Phaser 3635MFP Service Manual Manual pdf 22 page image

April 20102-7Phaser 3635MFP/WorkCentre 3550 02-100, 200Status Indicator RAPs02-100, 200 USB Faults RAP02-100 The USB device is invalid. Only SCSI type memory is supported.02-200 The USB memory is full or there is no response from the USB memory.ProcedureWARNINGSwitch off the electricity to the machine. Disconnect the power cord from the customersupply while performing tasks that do not need electricity. Electricity can cause death orinjury. Moving parts can cause injury.Refer to Wiring Diagram 5 (3635) or Wiring Diagram 14 (3550). Perform the following:1. Check the wiring between the USB host PWB, PL 3.10 Item 11 and CN7 on the MainPWB.2. Install new components as necessary:• USB host PWB, PL 3.10 Item 11.• USB harness, PL 3.10 Item 13.• (3635) UI PWB, PL 2.10 Item 24.• (3550) UI PWB, PL 2.11 Item 3.3. If the fault is still present, perform OF7 Main PWB Check RAP.