Phaser 4500/4510 Service Manual 6-11Adjustments and CalibrationsResetting Paper Handling Setup ValuesResetting the Paper Handling Setup values resets the default paper source, 2-sided printing, tray setup (default paper type/size), Load Paper Timeout, traysequence, tray prompt, custom size paper units, default paper destination, joboffset, output tray switch, fuser temperature configuration, and reprint jammedpages settings.1. From the Main Menu, select Paper Handling Setup, then press the OKbutton.2. Select Reset Paper Handling Setup, then press the OK button.3. Select Reset Paper Handling Setup NOW, then press the OK button.Resetting PostScript Setup ValuesResetting the PostScript Setup values resets the PostScript Error Info, ImageSmoothing, and Edge-to-Edge Printing settings.1. From the Main Menu, select PostScript Setup, then press the OK button.2. Select Reset PostScript Setup, then press the OK button.3. Select Reset PostScript Setup NOW, then press the OK button.Resetting PCL Setup ValuesResetting the PCL Setup values resets the default font number, pitch, pointsize, symbol set, orientation, form length, line termination character, andEdge-to-Edge Printing settings.1. From the Main Menu, select PCL Setup, then press the OK button.2. Select Reset PCL Setup, then press the OK button.3. Select Reset PCL Setup NOW, then press the OK button.Resetting General Setup ValuesResetting the General Setup values resets the Print-Quality Mode, PrintQuantity, and Print with Low Toner settings.1. From the Main Menu, select General Setup, then press the OK button.2. Select Reset General Setup, then press the OK button.3. Select Reset General Setup NOW, then press the OK button.
