Xerox Phaser 4500 Service Manual

Also see for Phaser 4500: Quick reference guide Brochure User guide Brochure Network guide

Contents

Phaser 4500/4510 Service Manual 8-87FRU Disassembly3. Disconnect the three wiring harness connectors (P/J801, P/J820, and P/J855) exposed behind the rear cover.4. Release release the wiring harnesses from the four harness clamps.5. Remove the six 8 mm tapping screws that attach the optional 550-sheetpaper feeder to the frame.6. Remove the optional 550-sheet paper feeder from the frame.Nudger Roller, Feed Roller(PL20.2.11) (PL20.2.12)Procedure:1. Release the hook that retains the nudger roller and pull the roller off thenudger shaft.2. Release the hook that retains the feed roller and pull the roller off the feedshaft.Replacement Note:■ The same roller (same part number) is used for the feed roller and nudgerroller assemblies.1. Feed roller 2. Nudger rollers4500-16112