SafetyXerox ® Phaser® 6020 Printer 11User GuideElectrical SafetyThis section includes:• General Guidelines .............................................................................................................................................................. 11• Power Cord .............................................................................................................................................................................. 12• Emergency Turn Off ............................................................................................................................................................ 12General GuidelinesWARNINGS:• Do not push objects into slots or openings on the printer. Touching a voltage point or shortingout a part could result in fire or electric shock.• Do not remove the covers or guards that are fastened with screws unless you are installingoptional equipment and are instructed to do so. Turn off the printer when performing theseinstallations. Disconnect the power cord when removing covers and guards for installing optionalequipment. Except for user-installable options, there are no parts that you can maintain orservice behind these covers.The following are hazards to your safety:• The power cord is damaged or frayed.• Liquid is spilled into the printer.• The printer is exposed to water.• The printer emits smoke, or the surface is unusually hot.• The printer emits unusual noise or odors.• The printer causes a circuit breaker, fuse, or other safety device to activate.If any of these conditions occur, do the following:1. Turn off the printer immediately.2. Disconnect the power cord from the electrical outlet.3. Call an authorized service representative.
