Installation and SetupXerox ® Phaser® 6020 Printer 37User GuideAdding the PrinterFor networking, set up your printer using Bonjour (Rendezvous), or connect using the IP address of yourprinter for an LPD/LPR connection. For a non-network printer, create a desktop USB connection.To add the printer using Bonjour:1. From the computer Applications folder or from the dock, open System Preferences.2. Click Print & Fax.The list of printers appears on the left of the window.3. Click the plus button (+) under the list of printers.4. Click the Default icon at the top of the window.5. Select your printer from the list and click Add.Note: If your printer was not detected, verify that the printer is on and that the Ethernet or USBcable is connected properly.To add the printer by specifying the IP address:1. From the computer Applications folder or from the dock, open System Preferences.2. Click Print & Fax.The list of printers appears on the left of the window.3. Click the plus button (+) under the list of printers.4. Click IP.5. From the Protocol drop-down menu, select the protocol.6. In the Address field, enter the IP address of the printer.7. In the Name field, enter a name for the printer.8. From the Print Using drop-down list, choose Select a driver to use.9. Select the print driver for your printer model from the list.10. Click Add.See also:Online Support Assistant at: www.xerox.com/office/6020support
