TroubleshootingPhaser 7500 Color PrinterUser Guide131Print-Quality ProblemsThis section includes:• Using Built-in Troubleshooting Tools on page 131• Troubleshooting Print-Quality Problems on page 133Your Phaser 7500 printer is designed to produce consistently high quality prints. If you observeprint-quality problems, use the information on these pages to troubleshoot the problem. For moreinformation, go online to Xerox Support & Drivers at www.xerox.com/office/7500support.Caution: The Xerox warranty, service agreement, or Total Satisfaction Guarantee does not coverdamage caused by using unsupported paper, transparencies, or other specialty media. The TotalSatisfaction Guarantee is available in the United States and Canada. Coverage may vary outsidethese areas; please contact your local representative for details.Note: To enhance print quality, toner cartridge(s) for many equipment models have been designedto cease functioning at a predetermined point.Using Built-in Troubleshooting ToolsYour printer contains the following built-in tools to help you diagnose print quality problems as well asadjust your printer’s image quality.• Printing the Troubleshooting Print Quality Page on page 131• Setting Color Calibration on page 131• Calibrating the Paper Type on page 132• Adjusting the Print Margins on page 132• Selecting Paper Type on page 132Printing the Troubleshooting Print Quality PagePrint this Information Page for more help.1. Press the Down Arrow button.2. Select Troubleshooting > Print Quality Problems > Troubleshooting Print Quality Page.3. Press the OK button to print.Setting Color Calibration1. Press the Down Arrow button.2. Select Troubleshooting > Print Quality Problems > Calibrate Colors.3. Press the OK button to print.
