PrintingPhaser 7500 Color PrinterUser Guide69Printing on Special MediaThis section includes:• Printing on Transparencies on page 69• Printing on Envelopes on page 70• Printing on Labels on page 70• Printing on Glossy Paper on page 71• Using Custom Paper Types on page 72• Using Custom Size Paper on page 73Printing on TransparenciesTransparencies can be printed from Tray 1 (MPT) and Tray 2. They should be printed on one side only.For best results, use only recommended Xerox transparencies.To order paper, transparencies, or other specialty media, contact your local reseller or go towww.xerox.com/office/7500supplies.Caution: Damage caused by using unsupported paper, transparencies, or other specialty media isnot covered by the Xerox warranty, service agreement, or Total Satisfaction Guarantee. The TotalSatisfaction Guarantee is available in the United States and Canada. Coverage may vary outsidethese areas; please contact your local representative for details.See also:www.xerox.com/paper Recommended Media List (United States)www.xerox.com/europaper Recommended Media List (Europe)Guidelines• Remove all paper before loading transparencies in the tray.• Do not load more than 50 transparencies in Tray 1 (MPT). Do not load more than 100transparencies in Tray 2. Overloading the tray may cause the printer to jam.• Handle transparencies by the edges using both hands to avoid fingerprints and creases, which cancause poor print quality.• After loading the transparencies in the tray, use the control panel to change the paper type toXerox Transparency.
