6. Select Save.7. Press the Start button. The system begins the cleaning process and displays a“successfully completed” message when finished. Select OK.NoteThe process with 5 sheets of paper will take approximately one minute.DFA Finisher Profile (for 3rd PartyFinishing Devices)If the press is installed with 3rd party inline finishers (Document Finishing Architecturedevices that follow the Standard Finisher Plus and Interface Module), DFA Finisherprofiling will have been enabled during installation. As a result, the DFA Finisher Profilefeature will be viewable from the Tools area of the press touch screen for the systemadministrator to make any further changes or additions to the DFA profiling of thedevices on the system.Use the DFA Finisher Profile feature to create a profile for the specified DFA device andadd, edit or delete attributes for the device, such as timing values.NoteFor information about the DFA settings to enter for the device, refer to the 3rd partyDFA Finisher documentation.NoteTo set up the job workflow for 3rd party DFA finishers, always enter the DFA profiles onthe press first and then enter those attributes through the Profile tab in the Stock LibraryManager application on the print server.1. Log in as the administrator.2. Press the Tools button on the press Control Panel.3. Select the Tools icon.4. From the screen that displays, select Maintenance.5. Scroll down the list to locate and select Finisher Adjustment and DFA FinisherProfiles.6. From the DFA Finisher Profile screen:a) If adding a new 3rd party finisher, select an available row and select Create/Edit.Enter the name and other attributes for that device.b) If changing information about an existing device, select that finisher’s row andselect Create/Edit to edit the profile.c) If removing a 3rd party finishing device, select that finisher’s row and select Delete.7. Select Save.8. Select Close.2-3Xerox® Versant™ 2100 PressSystem Administration GuideTools (in Admin Mode)
