Table 1. Default Paper Width NVM Settings at Initial InstallationNVM De-fault ValuePaper Width (lower/ upper limit)Media SizeNVM Chain Link NumberRangeNumber980 - 330298.0 - 330.2 mmAll widths al-lowed501 - 860 (lower limit range)FuserModule1980 - 330298.0 - 330.2 mm501 - 857 (upper limit range)1800 - 2499180.0 - 249.9 mmA3 SEF / A4 (XE);Letter LEF /11x17 (XC)501 - 861 (lower limit range)FuserModule22704 - 2980270.4 - 298.0 mm501 - 858 (upper limit range)3000 - 3100300.0 - 310.0 mmSRA3 (XE); 12 /13 inches (XC)501 - 862 (lower limit range)FuserModule33070 - 3302307.0 - 330.2 mm501 - 859 (upper limit range)NoteThe following shows typical workflow examples of width sizes you may use and whatNVM settings you would select to calibrate the NVMs. Any ranges can be used. Eachvalue is calculated with + / - 5mm.Table 2. Examples of Custom Paper Width Settings and their NVM ValuesNVM DefaultValue(12in.=304.8mm)(10in.=254mm)Paper Width(lower /upperlimit)Media SizeNVM Chain Link NumberRangeNumber2490lower > 249 mm8 x 10 inches(width is 10 in.)If range 2 is selected: 501 -861 (lower limit range)1, 2 or 3In this ex-ample,Range 22590upper > 259 mm501 - 858 (upper limitrange)2998lower >299.8mm12 x 18 inches(width is 12 in.)If range 3 is selected: 501 -862 (lower limit range)1, 2 or 3In this ex-ample,Range 33098upper >309.8mm501 - 859 (upper limitrange)9. Select the Save button.The NVM Read/Write window displays the entered value as the Current Value.10. Select Close to save your new setting and return to the Tools window.A “Reboot Machine” message displays.Xerox® Versant™ 2100 Press6-18System Administration GuideCommon Service Settings
