Network ConfigurationWorkCentre 7755/7765/7775 Multifunction PrinterSystem Administrator Guide22TCP/IPTransmission Control Protocol (TCP) and Internet Protocol (IP) are a two protocols within the InternetProtocol Suite. IP manages the transmission of messages from computer to computer while TCPmanages the actual end-to-end connections.Note: You can configure IPv4 settings at the printer control panel or through CentreWare IS. Youcan only configure IPv6 through CentreWare IS.Enabling TCP/IPNotes:• By default, TCP/IP is enabled. If you disable TCP/IP, you must enable it at the printercontrol panel before you can access CentreWare IS.• If your printer is locked, you must log in as a system administrator. For details, seeAccessing CentreWare IS on page 17.1. At the printer control panel, press the Machine Status button, then touch the Tools tab.2. Touch Network Settings > TCP/IP Settings.3. Touch TCPIP Enablement.4. Touch Enable for IPv4 or IPv6, then touch Save.Configuring TCP/IP Settings at the Control PanelManually Configuring the Network AddressNote: If your printer is locked, you must log in as a system administrator. For details, see AccessingCentreWare IS on page 17.1. At the printer control panel, press the Machine Status button, then touch the Tools tab.2. Touch Network Settings > TCP/IP Settings.3. Touch Dynamic Addressing > Disabled for DHCP, then touch Save.4. Touch IP Address/Host Name.5. Touch the field under IPv4 Address, then type the static IP address using the touch-screenkeypad.6. Touch the field under Host Name, then type the host name.7. Touch Save, then touch Close.8. Touch Subnet and Gateway.9. Touch Subnet Mask, then type the subnet mask address using the touch-screen keypad.10. Touch Save.11. Touch IP Gateway, type the gateway address using the touch-screen keypad, then touch Save.
