Network ConfigurationWorkCentre 7755/7765/7775 Multifunction PrinterSystem Administrator Guide40Configuring Authorization Access by GroupsLDAP server user groups can be used to control access to services and features. For example, the LDAPserver may contain a group of users called Admin. You can configure the Admin group on the printer sothat only members of this group have administrator access to the printer. When a user belonging tothe group Admin logs onto the printer, the printer performs an LDAP directory look-up to verify theuser. Once authenticated, the user is allowed administrative rights to the printer.You can set up and control access to your printer in four ways:• User Roles Access Setup on page 40• Device Access Setup on page 40• Service Access Setup on page 41• Feature Access Setup on page 41Note: If your printer is locked, you must log in as a system administrator. For details, see AccessingCentreWare IS on page 17.1. In CentreWare IS, click Properties > Connectivity > Protocols > LDAP.2. Click the Authorization Access tab at the top of the page.User Roles Access SetupYou can assign users to specific roles groups to allow them types of access.1. On the Authorization Access page, click the User Roles tab.2. In the System Administrator Access field, type the name of the group, defined in the LDAP serverdatabase, that you want to use to grant system administrator access to the printer.3. In the Accounting Administrator Access field, type the name of the group, defined in the LDAPserver database, that you want to use to grant accounting administrator access to the printer.4. To verify a user’s access to either role, type the user’s name in the Enter User Name field, thenclick Test.The Test Results column displays the users name if the user is a member of the LDAP group or NoAccess if they are not a member.5. Click Apply.Device Access SetupNote: Device Access setup requires that Authentication is enabled and Tools and Feature Accessare configured to require users to log in before they can access pathways. For details on thesetopics, see Setting up Access Rights on page 54 and Controlling Access to Tools and Features onpage 61.1. On the Authorization Access page, click the Device Access tab.2. In the Services Pathway field, type the name of a group, defined at the LDAP server, that youwant to use to provide access to the Services features on the printer.3. Repeat the process for Job Status Pathway and Machine Status Pathway.4. To verify a users access to either role, type the user’s name in the Enter User Name field, then clickTest.
