4-20Setting your machineThe address is only modified if several terminals are installed on your line. It is used to differentiatebetween two machines during SMS reception.When you want a contact to send SMSs to the terminal you choose, you must send him your linenumber and the destination terminal address.If your contact does not add the address of the terminal, the SMS will be received in the terminal withaddress 0.45 OK - SMS SERVICE / PARAMETERS) Automatic print of SMS received.451 OK - SMS SERVICE / PARAMETERS / AUTO PRINT) Select the option WITH or WITHOUT automatic print, then validate with OK key.) Beep activated on SMS reception452 OK - SMS SERVICE / PARAMETERS / SMS BEEP) Select the option WITH or WITHOUT BEEP on reception, then validate with OK key.) Presentation of SMS sender453 OK - SMS SERVICE / PARAMETERS / SENDER NAME) Select the option WITH or WITHOUT presentation of the sender, then validate with OK key.) Terminal address454 OK - SMS SERVICE / PARAMETERS / TERM. ADDR.) Enter the terminal number, then validate with OK key.S ENDING AN SMSTo send an SMS to any SMS-compatible devices:) Press the key) Write your SMS by means of the Qwerty keypadTo do so, you have a true editor at your disposal:• for the upper case letters, use the Ï• to move inside the data entry field, use the or keys• to move in the text from one word to another, press the C TRL key and one of the navigator keys• to go to the next line, use the key• to delete a character (by moving the cursor to the left), use the Í or C key) Press the key to confirm your entry.) Dial the number of the recipient (mobile phone or any other SMS-compatible device) in one ofthe following ways:• dial the number by means of the numerical keypad• enter the first letters of the recipient name• press the key until the required name appears (names are classified in alphabetical order)
