6-14Operation"Sophisticated" copy) Position the document (refer to paragraph Document depositing, page 6-1).) Press key .) Enter the required number of copies and confirm with the OK key.) Using the keys or select the scan modes 1 DUPLEX->DUPLEX (Front/Rear) or1-SIDE->DUPLEX or DUPLEX->1-SIDE or 1-SIDE->1-SIDE and confirm with the OK key.) If you have selected for printing the mode DUPLEX, select with the keys or LONGBORDER or SHORT BORDER and confirm with the OK key.) Using the keys or select the resolution: ULTRA FAST, FAST, QUALITY or PHOTO andconfirm with the OK key.) Using the keys or select the degree of contrast and confirm with the OK key.) Using the keys or select the degree of brightness and confirm with the OK key.) Select the collation mode COPY ASSEMBLED or NOT ASSEMBLED and confirm with the OKkey.) Using the keys or or the numeric key pad or eventually the key dedicated for zoom setup the degree of zoom between 25% TO 400% and confirm with the OK key.) Using the keys or or the numerical key pad select the required base values and confirmwith the OK key.) Using the keys or select the type of paper NORMAL PAPER or THICK and confirm withthe OK key.) Using the keys or select the required paper tray, AUTOMATIC TRAY, UPPER TRAY orLOWER TRAY and confirm with the OK key.1. If you have previously installed the duplex module at the back of your terminal
