3 Copy40 Xerox WorkCentre 4250/4260 User Guide2. Select Copy on the touch screen. Ensure that the Copy screen is displayed.3. Press the Clear All button on the control panel to cancel any previousselections. The control panel returns to the default entry screen.4. Select the button for the feature required.If necessary, select one of the tabs and configure the copy settings. Forinformation on the individual tabs, refer to the following:Copy Tab – page 45Image Quality – page 48Layout Adjustment – page 50Output Format – page 543 Enter the QuantityThe maximum copy quantity is 999.Use the numeric keypad on the control panel to enter the number of copiesrequired. The number entered is displayed in the upper right-hand corner of thescreen.Feature DescriptionCopy Use this tab to select the standard options for a copy job,e.g. reduce/enlarge, 2 sided copying, etc.Image Quality Use this tab to adjust the appearance of the copy output,e.g. lighten/darken, background suppression, etc.Layout Adjustment Use this tab to adjust the layout of the copy output, e.g.original size, edge erase, etc.Output Format Use this tab to produce different options for the finishedoutput, e.g. booklet creation, covers, etc.
