Xerox WorkCentre 4260C Quick Use Manual

Also see for 4250 - WorkCentre - Copier: Features Specifications Evaluator guide User guide Supplementary manual

Xerox WorkCentre 4260C Quick Use Manual Manual pdf 16 page image

12 quick use guideInstall Print DriversThis procedure describes how to install Print Drivers using the Print Driver CD.NOTE: If you wish to install different print drivers or are using a different operatingsystem refer to the System Administration CD for full details.The Print Drivers are on the Print Driver CD that was delivered with your machine.You can use the CentreWare Print and Fax Drivers CD to install multiple componentssuch as printer drivers, user documentation and PPDs (PostScript® PrinterDescriptions) at the same time. To use the installer, load the CentreWare Print andFax Drivers CD-ROM delivered with your machine.NOTE: CentreWare is a group of applications, internet services and printer driverswhich provide assistance to customers configuring and installing the device.1 At the client workstation insert the Driver CD into the CD drive.2 If the CD does not start automatically, go to the Start menu, click Run and browseto the CD drive. Click Setup and click OK. Click OK to start the installation procedure.3 Select the language for the installation and click Continue. The driver screen isdisplayed.NOTE: The selections are:Install Print and Scan Drivers - Installs both the print drivers and the scan drivers.Install Print Driver - Installs just the print drivers.Install Scan Driver - Installs just the scan drivers.To install Print Drivers use the instructions below.4 Click Install Drivers.5 Click Install Print Drivers.NOTE: The PCL6 Driver is installed by default.6 To install the PCL 5 or PS Print Drivers, click Option and check the boxes for thedrivers required.7 Enter the Printer’s IP address, DNS name or UNC path for the device.8 Click Install.9 Follow the on screen messages to complete the installation.10 When the Print Driver is successfully installed, either send a test print from the printdriver or submit a job to the WorkCentre 4260 Series printer.11 If the printing operation is successful, continue on to the next setup procedure in thisdocument. If the print operation failed, refer to Troubleshooting on page 33.For a full explanation refer to the System Administration CD that accompanied yourmachine.