Xerox WorkCentre 5019 User Manual

Also see for WorkCentre 5019: Specifications Network addendum Service documentation

Contents

Loading paperWorkCentre 5019/5021User Guide4-13Setting the paper sizeThis section describes how to set the paper size and orientation for Trays 1 and 2.After you load paper, make sure to set the size and orientation of the paper loaded into the tray.Note You cannot change the setting while the machine is processing a job.1. Press the Paper Supply button to select a tray where the paper you will specify the paper size andorientation is loaded.In the machine status diagram, the tray indicator lights up on the selected tray, and its paper sizeand orientation are displayed on the paper size display.2. Press and hold the Size (Press 2sec) button for more than 2 seconds until the paper size in thepaper size display area starts blinking.Paper Supply buttonSize (Press 2sec) button