Downloading Software41Downloading SoftwareThis section describes how to manually upgrade the machine’s software.1. Open your web browser, and enter the machine's IP address in the [Address] boxto access CentreWare Internet Services.2. Click the [Properties] tab.3. On the collapsible menu of the Menu Panel, click the [Services] folder, and thenthe [Machine Software] folder.4. Configure required settings.5. Click [Apply].6. If prompted, enter the System Administrator user ID and passcode, and click [OK].NOTE: By default, the System Administrator user ID is "11111" and its passcode is notset.UpgradesUpgradesSpecify whether the machine is to allow software downloads.NOTE: To manually upgrade the machine software, Software Download must also beset to [0] (Allow) in the System Setting Mode (menu number: 127). For moreinformation, refer toSystem Settings on page 109.Manual UpgradeLast Successful UpgradeDisplays the most recent version of the software.Manual UpgradeSpecify the latest software file.Printing the Configuration ReportThis section describes how to print out the Configuration Report. The ConfigurationReport lists the total number of prints, the machine's hardware configuration, networkinformation, and the status of various settings. Print this report to confirm the machineconfiguration.1. On the Control Panel of the machine, hold down the <2> button for four secondsor longer, and while holding down the <2> button, press the button.The Configuration Report is printed out.2. Read the Configuration Report to confirm the configuration of the machine.
