Xerox WorkCentre 5020 User Manual

Also see for WorkCentre 5016: Specification User guide

Contents

Xerox WorkCentre 5020 User Manual Manual pdf 46 page image

Changing the Size and Orientation of Paper in the TraysXerox WorkCentre 5016/5020 User Guide46Changing the Size and Orientation of Paper in the TraysThis section describes how to replace paper in the trays with a different size andorientation of paper, and how to specify the size and orientation of paper.Note • When using non-standard size paper for a print job, load the paper in the Bypass Tray.You must register the paper size in the print driver in advance.For information on how to specify a custom paper size in the print driver, refer to"Specifying the Custom Paper Size" (P.79).Changing the Size and Orientation of Paper in Tray 1The following procedure describes how to change the size and orientation of paper inTray 1.1. Pull out Tray 1 towards you.Note • While the machine processes ajob, do not pull out the tray in use.2. Remove the remaining paper.3. Push down the metal plate to thebottom of the tray.4. Slide paper guides towards the frontand back of the tray.