Administrator ToolsWorkCentre 7120/7125 Multifunction PrinterSystem Administrator Guide154Watermarks and AnnotationsA watermark inhibits the replication of a document by adding text or a background pattern to theprinted page. You can configure watermarks to print dates, unique IDs, background patterns, or to printdefault text. Additionally, you can set watermarks to print according to the job type.Annotations are customizable text strings that are printed on the document, similar to watermarks. Ifyou want to create a custom annotation not found in the default selections, you can set a text stringand then apply one of the four preset templates to the text string. When annotations are enabled, theyprint according to the layout template associated with the job type.WatermarksTo set up the watermark appearance and enable a forced watermark:1. In CentreWare IS, click Properties > Security > Watermark >Watermark.2. Under Watermark, specify the following:• Select the date format and watermark appearance.• Enable the forced watermark by job type, if necessary.3. Click Apply.Universal Unique IDTo print the Universal Unique ID number in the watermark:1. In CentreWare IS, click Properties > Security > Watermark >Universal Unique ID.2. Under Universal Unique ID, set where you want the unique ID to print on the page.3. Click Apply.Forced AnnotationsForced annotations allow you to create text strings for custom watermarks. You can create up to eightstrings with a maximum of 32 characters. Once the string is created, you can apply a layout templateto the watermark.To create text strings:1. In CentreWare IS, click Properties > Security > Force Annotation > Create Text String.2. Under Create Text String, type up to eight watermark text strings.3. Click Apply.To apply layouts to text strings:1. In CentreWare IS, click Properties > Security > Force Annotation > Apply Layout Template toCopy/Print Jobs.2. Under Apply Layout Template to Copy / Print Jobs, click Change Settings to apply the templateto the watermark string using one of the available types of print jobs.3. Next to Apply Layout Template, select Enabled to apply the layout template.
