SecurityWorkCentre 7120/7125 Multifunction PrinterSystem Administrator Guide59Secure HTTP and SSL/TLSYou can encrypt all data sent over HTTP by establishing an encrypted SSL connection. You can enableSSL encryption for the following services:• Configuring the printer in CentreWare IS• Printing from CentreWare IS• Printing using IPP• Managing scan templates• Network scanning• Network accountingBefore you begin:• Install a digital certificate. For details, see Installing a Digital Certificate on page 56.• Ensure that the date and time configured on the printer is correct. This is used to set the start timefor self signed certificates.Configuring Secure HTTP and SSL/TLS SettingsNotes:• A digital certificate must be installed on the printer before you can enable Secure HTTP.For details, see Installing a Digital Certificate on page 56.• If Secure HTTP is enabled, to access CentreWare IS, all pages will contain https:// in theURL for the Web page.1. In CentreWare IS, click Properties > Security > SSL/TLS Settings.2. Next to HTTP - SSL/TLS Communication, select Enabled.3. Type the port number you want to use for HTTP SSL/TLS.4. If you want to use SSL/TLS for LDAP communication, select Enabled next to LDAP - SSL/TLSCommunication.5. If you want to use S/MIME communication, select Enabled next to S/MIME - SSL/TLSCommunication. For more information about S/MIME configuration, see S/MIME on page 60.6. If you want to use SSL/TLS for SMTP communication, next to SMTP - SSL/TLS Communication,select a method that your server supports.Note: If you are unsure what method your server supports, select STARTTTLS (if available). If youselect STARTTLS (if available), the printer attempts to use STARTTLS. If your server does notsupport STARTTLS, SMTP communication is not encrypted.7. Select Enabled next to Verify Remote Server Certificate if necessary.8. Click Apply to accept the changes or Undo to retain the previous settings.
