2 Operation with Windows 95/98/MeXerox WorkCentre 7132 PostScript® User Guide 1110. Select the port that you are using and click [Next].11. Type a name for the printer and specify whether you want to use the printer as thedefault printer, then click [Next].12. Specify whether to print a test page, then click [Finish].Installation begins.13. Read the End User License Agreement and click [Agree].If you click [Disagree], see If you click Disagree in the License Agreement onpage 11 for details.14. Confirm that a printer has been added in the Printers window.This completes installation of the printer driver. Remove the CD-ROM from thedrive.See Printer Driver Properties on page 11 to configure the printer.Store your CD-ROM in a safe place.If you click Disagree in the License AgreementClick [No] to return to the operation and continue.Click [Yes] to cancel the installation. A printer is added to the Printers window, but theprinter driver is not installed properly.When you right-click the printer and click [Properties] from the menu, the Re-installationtab is added to the printer driver properties dialog box. Follow the directions on that tab.When you finish reinstalling the printer driver, see Printer Driver Properties on page 11to set up the printer.Printer Driver PropertiesThis section describes printer specific settings included in the printer driver properties.• Configuration Tab• Options Tab• Color Settings Tab• Watermarks Tab• Output Settings TabNOTE: You can also refer to Help for explanations of these settings. See How to UseHelp on page 19 for details about how to use Help.To view the printer driver properties, select the printer icon in the Printers window, thenclick [Properties] on the File menu.