Xerox WorkCentre 7132 User Manual

Also see for WorkCentre 7132: Quick use guide Setup guide Supplementary guide Paper guide Quick network setup guide

Contents

4 Operation with Windows 2000, Windows XP and Windows Server 2003Xerox WorkCentre 7132 PostScript® User Guide 39Device Settings Tab SettingsThis section describes Installable Options in the Device Settings tab. To print correctly,it is necessary to make the appropriate settings in this tab.Select the items in Installable Options and change the settings in the menu thatappears on the right.SettingsPaper Tray Configuration - Specifies the paper tray type installed on the machine.When [1-Tray] is selected, Tray 1 is available (standard configuration).When [3-Tray] is selected, Tray 2 and Tray 3 are installed.When [3-Tray (High Capacity)] is selected, the two-tray module Tray 2 and Tray 3 isinstalled.Duplex Unit - Specifies whether the duplex unit is installed. If it is, set to [Available].Output Options - Specifies whether the inner output tray or finisher output unit isinstalled.Side Output Tray - Specifies whether the side output tray is installed. If it is, set to[Available].Paper Size Settings - Specifies the paper size group for different areas to enable theselection of paper size common to that location.Switch Paper Size (8K/16K) - Indicate your language preference to enable the set of8K and 16K paper size that is best suited to your needs.Color Mode - Specifies the color setting. If [Black and White] is selected, all colors willbe printed in black.