5 Operation on Macintosh Computers60 Xerox WorkCentre 7132 PostScript® User Guide3. Specify the functions that you want to set.SettingsCollated - Specifies whether to collate a multiple-page file when a job is printed.Paper Type - Specifies the paper type for printing.Output Destination - Specifies the output tray.Output Color - Specifies printing in full color mode or black and white mode.Stapling - Specifies the stapling location and number of staples. This option requiresthe optional finisher unit.Offset - The position of individual jobs or sets of copies are shifted to either side of theoutput tray to enable easy separation.Feed Orientation - Specifies the paper orientation when printing from the bypass tray.When feeding the short edge of the paper first, select [Landscape]. When feeding thelong edge of the paper, select [Portrait].Front Cover - Specifies the paper tray that the front cover stock is to be fed from.Back Cover - Specifies the paper tray that the back cover stock is to be fed from.Print on Separators - Specifies whether to print on the transparency separators aswell as the transparency.Feed Separators from - Specifies the paper tray that transparency separators are tobe fed from. When [Auto] is selected, the tray set on the machine is used as the feeddestination.Paper Type (Separators) - Specifies a paper type for the transparency divider.Print Mixed Sized Originals - Specifies whether you are printing mixed sized originalsfor 2 Sided Print.Image Enhancement - Specifies whether to use the Image Enhancement function.Selecting [On] smoothes out boundaries when printing. This reduces jagged edges byartificially increasing the resolution of the image. When printing a bitmapped imagecomposed of coarse halftone dots, smooth color gradation is impossible in certainsituations. In this case, select [Off].Gray Guaranteed - Specifies printing non-raster image areas in black toner only.