Xerox WorkCentre 7132 User Manual

Also see for WorkCentre 7132: Quick use guide Setup guide Supplementary guide Paper guide Quick network setup guide

Contents

5 Operation on Macintosh ComputersXerox WorkCentre 7132 PostScript® User Guide 67Feed Separators from - Specifies the paper tray that transparency separators areto be fed from. When [Auto] is selected, the tray set on the machine is used as thefeed destination.Print on Separators - Specifies whether to print on the transparency separators aswell as the transparency.Paper Type (Separators) - Specifies a paper type for the transparency divider.Installing the Screen FontsThis section explains how to install the fonts in the Screen Font folder.It is recommended that all other applications are closed before installing the fonts.Otherwise, a warning message appears between steps 5 and 6.1. Start Macintosh and insert the PostScript Driver Library CD-ROM into the CD-ROM drive.2. Double-click the [WorkCentre-PS] icon followed by the Screen Font folder andthen the [PS3 Fonts Installer].3. When the Installer window appears, click [Continue].The license agreement dialog appears.4. Read through the agreement carefully and if you have no objections to it, click[Accept].The PS3FontsInstaller dialog box appears.5. You may select [Easy Install] or [Custom Install].Easy Install - installs all the fonts provided in the Screen Font folder.Custom Install - installs the selected fonts only. Simply click on the disclosuretriangle beside the four categories of fonts to display the fonts in each category andthen check the fonts to be installed. For example, the diagram below shows thatArial CE of the CE TrueType fonts is selected.A warning message will appear if you did not quit all other applications beforeperforming the font installation.