Initial SetupWorkCentre 7500 Series Multifunction Printer 19System Administrator GuideInitial Setup in CentreWare Internet ServicesCentreWare Internet Services is the administration and configuration software installed on theembedded Web server in the printer. It allows you to configure and administer the printer from a Webbrowser.Before you begin: TCP/IP and HTTP must be enabled to access CentreWare Internet Services. If you disable either ofthese services, enable them at the printer before accessing CentreWare Internet Services. Locate your printer IP address using the Configuration Report.Note: If your printer is locked, type the system administrator user name and password to access theProperties tab. The administrator user name is admin and the default password is 1111.Accessing CentreWare Internet ServicesAt your computer, open a Web browser, type the IP address of the printer in the address field, then pressEnter or Return.Locking or Unlocking the Printer1. In CentreWare Internet Services, click Properties > Security > Authentication.2. Click Tools & Feature Access.3. Under Presets, select: Standard Access - Only Lock Tools to lock the printer. Open Access - Unlock All Tools and Features to unlock the printer. Custom Access to select to lock or unlock individually any of the services in the list.4. Click Apply to save the new settings or Undo to retain the previous settings.Changing the System Administrator PasswordXerox® recommends that you change the default system administrator password after you configure theprinter. Be sure to store the password in a secure location.1. In CentreWare Internet Services, click Properties > Security.2. Click Admin Password.3. Under User Name, type the New Password.4. Retype the password to verify.5. Click Apply to save the new settings or Undo to retain the previous settings.