Initial Setup20 WorkCentre 7500 Series Multifunction PrinterSystem Administrator GuideUsing the Configuration Overview PageThe Configuration Overview page contains links to the commonly-accessed pages on the Properties tab.Use the Configuration Overview page to help you install your printer successfully.1. In CentreWare Internet Services, click Properties > Configuration Page.2. To configure any of the services or features, click Settings next to the service to open that page. Youcan also click View to open a page showing all options that you can select to create a clone file.Possible options include: SMart eSolutions Print Protocols Email Workflow Scanning Server Fax Internet Fax CloningNote: Not all options listed are supported on all printers. Some options apply only to specific printermodels or configurations.Assigning the Printer Name and Location1. In CentreWare Internet Services, click Properties > Description.2. Under Device Name, type a name for the printer.3. Under Location, type the location of the printer.4. Click Apply to save the new settings or Undo to retain the previous settings.Enabling ServicesServices must be enabled before they can be managed through the Tools and Feature Access page.1. In CentreWare Internet Services, click Properties > Services.2. Click Service Registration.3. Select the services to enable or click Enable All.4. Click Apply to save the new settings or Undo to retain the previous settings.Note: If a service is not enabled on the Service Registration page, you cannot view or manage it fromthe Tools and Features page. Ensure that the desired service is enabled.Viewing Services on the Control Panel1. At the printer control panel, press the Machine Status button, then touch the Machine Informationtab.2. Touch Installed Options.All installed options registered in CentreWare Internet Services and their status appear. Set optionsto Locked or Unlocked on the Tools & Services page.
