194Configure a Fax Repository using SMBInformation ChecklistBefore starting the installation procedure, please ensure the following items are available or have beenperformed.1. Create a shared folder to be used as a fax repository. Note the Share Name of the folder and theComputer Name or Server Name.2. Create a user account and password for the machine with full access rights to the fax repository. Notethe user account and password.3. Test the settings by attempting to connect to the shared folder from another PC by logging in with theuser account and password. Create a new folder within the directory and then delete the folder. If youcannot perform this function check the user account access rights.At your Workstation4. Open your Web browser and enter the IP address of the machine in the Address or Location field.Press [Enter].5. Click the [Properties] tab.6. Enter the Administrator User name and password if prompted. The default is [admin] and [1111].7. Select [Services].8. Select [Server Fax].9. Select [Fax Repository Setup] in the directory tree.10. Select SMB for [Protocol].11. Select [IP Address] or [Host Name] and enter either IP address or Host Name of the computer wherethe fax filing repository (SMB server/workstation) is located.12. Enter the Port Number if required (it is recommended to retain the default setting).13. Enter the Share Name in [Share].14. Enter the Document Path (as it relates to the share) where the fax repository is located, in [DocumentPath]. For example: If the path is sharename\wc\fax, enter \wc\fax in [Document Path].15. Enter the [Login Name] and [Password] for the fax repository. Also, select System to have the systemlog into the server, or Authenticated User to have your Authentication Server determine access.16. Click [Apply] to accept the changes.Configure General Settings17. Click Defaults in the left hand pane.18. To print a Confirmation Sheet after every Server Fax job select Edit in the General section, then selectOn from the drop down menu. The Confirmation Sheet specifies the success or failure of the ServerFax job. If the fax is successful the location of the document on the fax server is also specified.19. Check the [User Name] and [Domain] boxes if you want these to appear on the Job Log. The Job Logis filed in the fax repository with the fax job.20. Click [Apply].
