Xilinx ZCU102 User Manual
Also see for ZCU102: ManualGetting Started Quick GuideTutorialSoftware Install and Board SetupQuick start guide
                                                                                                                                         | |
Contents
|
ZCU102 Evaluation Board User Guide www.xilinx.com 82UG1182 (v1.2) March 20, 2017Chapter 3: Board Component DescriptionsSFP+Four (4) PL-side GTH transceivers in Bank 228 are provided for the quad SFP+ interface.Available GTH reference clocks include a programmable Si570 clock, and a jitter attenuatedrecovered clock from a Si5328.SFP+ modules typically provide an I2C based control interface. This I2C interface isaccessible for each individual SFP+ module through the I2C multiplexer topology on theZCU102.HDMIThree (3) PL-side GTH transceivers are dedicated for HDMI source and sink. Modessupported are 4K, 2K at 60 f/s and 2160p60. External circuitry for interfacing TMDS signalswith the GTH transceivers is required.SMAOne (1) MGT in Bank 128 is provided on a SMA connector pair. Available MGT clocks includea user provided MGT reference clock on an SMA connector pair, and a programmable Si570clock. Table 3-35 lists GTH bank 128 connections.Send Feedback |
Related manuals for Xilinx ZCU102
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine