Xilinx ZCU104 User Manual
Also see for Zynq UltraScale+ ZCU104: Quick start guideGUI Tutorial
                                                                                            | |
Contents
| 
ZCU104 Board User Guide 15UG1267 (v1.1) October 9, 2018 www.xilinx.comChapter 2: Board Setup and ConfigurationDefault Jumper and Switch SettingsFigure 2-1 shows the ZCU104 board jumper header and DIP switch locations. Eachnumbered component shown in the figure is keyed to Table 2-2 (for default jumpersettings) or Table 2-3 (for default switch settings). Both tables reference the respectiveschematic page numbers.JumpersTable 2-2: Default Jumper SettingsNumber Ref. Des. Function Default SchematicPage33 J85POR_OVERRIDE• 1-2: Enable• 2-3: Disable2-3 334 J12SYSMON I2C address• Open: SYSMON_VP_R floating• 1-2: SYSMON_VP_P pulled down1-2 334 J13SYSMON I2C address• Open: SYSMON_VN_R floating• 1-2: SYSMON_VP_N pulled down1-2 335 J20Reset sequencer PS_POR_B• Open: Sequencer does not controlPS_POR_B• 1-2: Sequencer can control PS_POR_B1-2 1235 J21Reset sequencer PS_SRST_B• Open: Sequencer does not controlPS_SRST_B• 1-2: Sequencer can control PS_SRST_B1-2 1235 J22Reset sequencer inhibit• Open: Sequencer normal operation• 1-2: Sequencer inhibit (resets stayasserted)Open 12Send Feedback |
Related manuals for Xilinx Zynq UltraScale+ ZCU104
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine