Wi-Fi ArrayViewing Status on the Wi-Fi Array 151StationsThis status-only window shows client stations currently visible to the Array. Youmay choose to view only stations that have associated to the Array, or onlystations that are not associated, or both, by selecting the appropriate checkboxesabove the list. The list shows the MAC address of each station, its NetBIOS name,its IP address, its manufacturer, the SSID used for the association, the Group (ifany) that this station belongs to, its VLAN, its QoS, the IAP used for theassociation, transmit and receive rates, the RSSI for each station, and how longeach association has been active (up time).You may click the Detail checkbox at the bottom of the window to show a numberof additional columns, including security settings used by the connection, thechannel and band used, and additional RF measurements.Figure 81. StationsYou may sort the rows based on any column that has an active column header,indicated when the mouse pointer changes to the hand icon . Click again toreverse the sort order. You may select a specific station and perform one of thefollowing actions by clicking the associated button: Deny Access: Sends a de-authentication frame to the selected station andexplicitly denies it access by adding its MAC address to the Deny List inthe Access Control List window. To permit access again, go to “AccessControl List” on page 223 and delete the station from the Deny list. Deauthenticate: Sends a de-authentication frame to the selected station.The station may re-authenticate.
