Wi-Fi Array190 Configuring the Wi-Fi ArrayDNS SettingsThis window allows you to establish your DNS (Domain Name System) settings.The Array uses these DNS servers to resolve host names into IP addresses. TheArray also registers its own Host Name with these DNS servers, so that othersmay address the Array using its name rather than its IP address. Note that theDNS servers defined here are not used by wireless clients—servers for stationsassociated to the Array are defined along with DHCP pools. See “DHCP Server”on page 203. When finished, click on the Apply button to apply the new settingsto this session, or click Save to apply your changes and make them permanent.Figure 110. DNS SettingsProcedure for Configuring DNS Servers1. DNS Host Name: Enter a valid DNS host name.2. DNS Domain: Enter the DNS domain name.3. DNS Server 1: Enter the IP address of the primary DNS server.4. DNS Server 2 and DNS Server 3: Enter the IP address of the secondaryand tertiary DNS servers (if required).5. Click on the Apply button to apply the new settings to this session, orclick Save to apply your changes and make them permanent.See AlsoDHCP ServerNetwork
