Wi-Fi ArrayConfiguring the Wi-Fi Array 175Configuring the Wi-Fi ArrayThe following topics include procedures for configuring the Array using theproduct’s embedded Web Management Interface (WMI). Procedures have beenorganized into functional areas that reflect the flow and content of the WMI.The following WMI windows allow you to establish configuration parameters foryour Array, and include: “Express Setup” on page 176 “Network” on page 182 “Services” on page 193 “VLANs” on page 205 “Security” on page 209 “SSIDs” on page 235 “Groups” on page 247 “IAPs” on page 253 “WDS” on page 285 “Filters” on page 289After making changes to the configuration settings of an Array you must click onthe Save button at the bottom of the configuration window, otherwise the changesyou make will not be applied the next time the Array is rebooted. Click the Applybutton if you want the changes applied to the current configuration, withoutmaking them permanent.This chapter only discusses using the configuration windows on the Array. Toview status or use system tools on the Array, please see: “Viewing Status on the Wi-Fi Array” on page 127 “Using Tools on the Wi-Fi Array” on page 295
