Wireless LAN Array70 Configuring the Xirrus ArrayMaking Configuration Changes to the ArrayThis section has been organized into functional areas that reflect the flow andcontent of the WMI. Configuration instructions to the Wireless LAN Arrayrequire you to input data in one or more of the following formats:z Specifying data (for example, IP addresses, descriptions, etc.).z Making selections from pull-down lists.z Choosing an option by clicking on a radio button (for example, on/off).z Clicking on a check box to activate/deactivate a feature.z Clicking on a button to confirm a command or apply your changes.Array StatusThis is a status only page that provides a snapshot of the global configurationsettings for all XS-3900/XS-3700/XS-3500 network interfaces and radios. Youmust go to the appropriate configuration page to make changes to any of thesettings displayed here (configuration changes cannot be made from this page).Figure 47. WMI: Array Status Page
