Xirrus XS-3900 User Manual
Also see for Wi-Fi Array XS-3500: User guideConfiguration guide
                                                                                                                                            | |
Contents
| 
Wireless LAN ArrayConfiguring the Xirrus Array 757. Configure the Fast Ethernet (10/100 Megabit), Gigabit 1 and Gigabit 2network interfaces. The fields for each of these interfaces are the same,and include:a. Enable Interface: Choose Yes to enable this network interface, orchoose No to disable the interface.b. Allow Management on Interface: Choose Yes to allow managementof the Array via this network interface, or choose No to deny allmanagement privileges for this interface.c. Configuration Server Protocol: Choose DHCP to instruct the Arrayto use DHCP to assign IP addresses to the Array’s Ethernet interfaces,or choose Static IP if you intend to enter IP addresses manually. Ifyou choose the Static IP option, you must enter the followinginformation:z IP Address: Enter a valid IP address for this Array. To useany of the remote connections (Web, SNMP, or SSH), a validIP address must be used.z IP Subnet Mask: Enter a valid IP address for the subnetmask (the default is 255.255.255.0). The subnet mask definesthe number of IP addresses that are available on the routedsubnet where the Array is located.z Default Gateway: Enter a valid IP address for the defaultgateway. This is the IP address of the router that the Arrayuses to forward data to other networks.8. SSID (Wireless Network Name): The SSID (Service Set Identifier) is aunique name that identifies a wireless network. All devices attempting toconnect to a specific WLAN must use the same SSID. The default for thisfield is “xirrus.”For additional information about SSIDs, go to the Multiple SSIDs sectionof “Frequently Asked Questions” on page 222. |
Related manuals for Xirrus Wi-Fi Array XS-3500
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine