Wireless LAN ArrayInstalling the Xirrus Array 63Graphic D shows a cutaway example of how the toggle bolt is used tosecure an item to the wall (in our case, the item is the Wall MountingBracket—secured to the wall with a minimum of 5 toggle bolts.Do not attach the Wall Mounting Bracket to the wall at this time.Attach the Mounting Plate to the Wall Mounting BracketSecure the Wireless LAN Array’s mounting plate to the Wall MountingBracket (4 places)—tighten the 4 bolt assemblies to a torque of 10–12 lbf.ft(1.38–1.66 kgf.m). Do not overtighten the bolts.Figure 41. Attaching the Wall Mounting PlateAttach the Wall Mounting Bracket/Plate Assembly to the Wall6. Secure the Wall Mounting Bracket (with attached Mounting Plate) to thewall at the toggle bolt anchors you created in Steps 2 through 5—aminimum of 5 places.Mounting PlateSecure (x4 bolt assemblies)
