YASKAWA 1000 Series Installation Manual

Also see for 1000 Series: Installation manual Installation manual Installation manual Installation manual Installation manual

Contents

6 Related Parameters26 YASKAWA ELECTRIC TOBP C730600 42D 1000-Series Option SI-P3 Installation ManualF6-08(36A)Reset CommunicationParametersDetermines which F6- and F7- parametersare reset to default values when initializing the driveusing A1-03.0: Do not reset parameters1: Reset parametersNote: Setting this parameter does not affectcommunication-related parameters. Setting thisparameter only determines if communication-relatedparameters(F6- and F7-) are also reset when initializingwith A1-03.Default: 0Range: 0, 1F6-14(3BB)<3> <7>bUS Error Auto ResetEnables or disables the bUS Error Auto Reset.0: Disabled1: EnabledDefault: 0Range: 0, 1F6-30(3CB)<8> <9>PROFIBUS-DP NodeAddress Sets the node address.Default: 0Min: 0Max: 125F6-31(3CC)PROFIBUS-DP Clear ModeSelectionSelects the action to take when a “Clear Mode”command is received.0: Resets to 01: Maintains the previous valueDefault: 0Range: 0, 1F6-32(3CD)<7> <9>PROFIBUS-DP Data FormatSelection0: PPO Type1: Conventional2: PPO (w/bit 0) <3> <10>3: PPO Type (Auto Enter) <3> <11>4: Conventional (Auto Enter) <3> <11>5: PPO (w/bit0, Auto Enter) <3> <10> <11>Default: 0Range: 0 to 5F7-16(3F4)<3> <7>Communication LossTime-outSets the time-out value for communication lossdetection in tenths of a second. A value of 0 disablesthe connection time-out.Example: An entered value of 100 represents 10.0seconds.Default: 0.0Min: 0.0Max: 30.0F7-60(780)<3> <7>PZD1 WriteSets MEMOBUS/Modbus address for PZD1 Write(PPO Write).The value of 0 to 2 enables the PZD1 Write as STW.Default: 0HMin: 0HMax: FFFFHF7-61(781)<3> <7>PZD2 WriteSets MEMOBUS/Modbus address for PZD2 Write(PPO Write).The value of 0 to 2 enables the PZD2 Write as HSW.Default: 0HMin: 0HMax: FFFFHF7-62(780)<3> <7>PZD3 WriteSets MEMOBUS/Modbus address for PZD3 Write(PPO Write).The value of 0 to 2 disables the PZD3 Write.Default: 0HMin: 0HMax: FFFFHF7-63(783)<3> <7>PZD4 WriteSets MEMOBUS/Modbus address for PZD4 Write(PPO Write).The value of 0 to 2 disables the PZD4 Write.Default: 0HMin: 0HMax: FFFFHNo.(Addr. Hex) Name Description Values