2-15165553-1CDHW14821832 Conveyor Condition File2.8 WORK ID SHIFT Condition FileConveyor SynchronizedFunciton with ShiftFunctions2.8 WORK ID SHIFT Condition File(1) FILE NO.Displays the WORK ID SHIFT condition file.(2) USED STATUS (USED/NOT USED)Specify whether the WORK ID SHIFT condition file is used or not.(3) PORT NO. (CN1/CN2/CN3)Displays the port number where the WORK ID detecting limit switch isconnected.(4) CHATTERING PRVNT DIS (0 to 9999.9 mm)Set a distance to prevent the repeated inputs of the WORK ID detectinglimit switch signal due to the limit switch chattering. While the conveyormoves for the set distance from the moment the WORK ID detectinglimit switch signal is input, another WORK ID detecting limit switchsignal is ignored.Set “0” to disable monitoring for the chattering prevention distance andto count the number of workpieces with every input.(5) CHATTERING PRVNT TIME (0 to 999.9 sec)Set a time to prevent the repeated inputs of the WORK ID detecting limitswitch signal due to the limit switch chattering. Until the set time passesfrom the moment the WORK ID detecting limit switch signal is input,another WORKD ID detecting limit switch signal is ignored.Set “0” to disable monitoring for the chattering prevention time and tocount the number of workpieces with every input. If both the distanceand the time for the chattering prevention are set, the larger one isapplied.(1)(2)(3)(4)(5)(6)(7)(8)(9)35 of 98
