5 Conveyor Monitoring Displays for the Shift Functions5.4 CV WORK IN/NOT SHIFT STATUS Display5-14165553-1CDHW1482183Conveyor SynchronizedFunciton with ShiftFunctions5.4.1 Deleting a Conveyor WORK IN/NOT Shift Data*Cannot be used on new models shipped with version DN1.60-00 or later.Delete a conveyor WORK IN/NOT shift data in the following manner.Press the area key Select {DATA} Select “CLEAR DATA” 1) Move thecursor to “YES” and press [ENTER]1 The following display appears.NOTE• While power is supplied to the DX200, the DX200manages and updates automatically all the conveyordata regardless of the operation mode. Accordingly,deleting data while the conveyor is moving does notcause a problem. However, it may cause a malfunctiondue to inconsistency between the actual conveyorstatus and the DX200 conveyor data in the followingcases:– - The conveyor moves while power is not supplied tothe DX200 or during the DX200 start sequence.– - A momentary power failure occurs during operationin play mode.– - The virtual conveyor mode is set with the setting“Ignorance of shift distance in virtual mode.”• “CLEAR DATA” operation deletes the shift data on thecurrently active display. Delete a start shift data on thestart shift data display, a WORK ID shift data on theWORK ID shift display, and a WORK IN/NOT shift dataon the WORK IN/NOT shift display respectively. Deleteunnecessary shift data according to the systemconfiguration.84 of 98
