YASKAWA MP2000 Series User Manual

YASKAWA MP2000 Series User Manual Manual pdf 6 page image

6Safety PrecautionsThe following precautions are for checking products on delivery, storage, transportation, installation, wiring, operation,maintenance, inspection, and disposal. These precautions are important and must be observed.■ Storage and Transportation• Before starting operation in combination with the machine, ensure that an emergency stop procedurehas been provided and is working correctly.There is a risk of injury.• Do not touch anything inside the MP2000 series.There is a risk of electrical shock.• Always keep the front cover attached when power is being supplied.There is a risk of electrical shock.• Observe all procedures and precautions given in this manual for trial operation.Operating mistakes while the servomotor and machine are connected can cause damage to the machine or evenaccidents resulting in injury or death.• Do not remove the module, front cover, cables, connector while power is being supplied.There is a risk of electrical shock.• Do not damage, pull on, apply excessive force to, place heavy objects on, or pinch cables.There is a risk of electrical shock, operational failure or burning of the MP2000 series.• Do not attempt to modify the MP2000 series in any way.There is a risk of injury or device damage.• Do not approach the machine when there is a momentary interruption to the power supply. Whenpower is restored, the machine controller and the connecting devices may start operation suddenly.Provide suitable safety measures to protect people when operation restarts.There is a risk of injury.• Do not allow installation, disassembly, or repairs to be performed by anyone other than specifiedpersonnel.There is a risk of electrical shock or injury.• Do not store or install the MP2000 series in the following locations.• Direct sunlight• Ambient temperature exceeds the storage or operating conditions• Ambient humidity exceeds the storage or operating conditions• Rapid changes in temperature or locations subject to condensation• Corrosive or flammable gas• Excessive dust, dirt, salt, or metallic powder• Water, oil, or chemicals• Vibration or shock• Do not subject the MP2000 series to halogen gases, such as fiuorine, chlovine, bromine, and iodine,at any time even during transportation or installation.There is a risk of device damage or injury.• Do not overload the MP2000 series during transportation.There is a risk of injury or an accident.WARNINGCAUTION