1. Start WinPLC7.ð A ‘Demo’ dialog is shown2. Click at [Activate Software].ð The following dialog for activation is shown:3. Fill in the following fields:n Email-Addr.n Your Namen Serial numberThe serial number may be found on a label at the CD case of WinPLC7.4. If your computer is connected to Internet you may online request the Activation Keyby [Get activation key via Internet]. Otherwise click at [This PC has no access to theInternet] and follow the instructions.ð With successful registration the activation key is listed in the dialog windowrespectively is sent by email.5. Enter this at ‘Activation code’ and click at [OK].ð Now, WinPLC7 is activated as "Profi" version.To find a station via Ethernet (accessible nodes) you have to install the WinPCAP driver.This driver may be found on your PC in the installation directory at WinSPS-S7-V5/WinPcap_... .exe. Execute this file and follow the instructions.8.3 Example project engineering8.3.1 Job definitionIn the example a FC 1 is programmed, which is cyclically called by the OB 1. By setting of2 comparison values (value1 and value2) during the FC call, an output of the PLC-System should be activated depending on the comparison result.Activation of the "Profi"versionInstallation of WinPCAPfor station search viaEthernetVIPA System 300S+WinPLC7Example project engineering > Job definitionHB140 | CPU-SC | 313-5BF23 | en | 19-01170
