Link CX-24 User’s ManualVersion 1.0 Page 6 February 2004Table 1.2 – Link CX-24 Interface Connectors and IndicatorsNote: For connector pin-outs, refer to Appendix A.No. Name Component Description From Note1 POWERMale 4-PinCircularConnectorPower inputplug Power Supply Accepts ±21 to ±60 VDC2 CRAFTFemale 4-PinCircularConnectorRS-232receptacleAsynchronouslaptop port1200 to 115,200 baud,used only for tech supporttroubleshooting3 RSSI Female BNCConnectorReceive SignalLevel Indicator Voltmeter Verifies RF signal strength,used to align antenna4 OUT Female TNCConnectorDS-3 data fromthe radio linkDS-3 dataequipment --5 IN Female TNCConnectorDS-3 data tothe radio linkDS-3 dataequipment --6 ETHERNET 2Female 4-PinCircularConnector10/100Base-Ttransmit andreceivereceptacleEthernetequipmentFor Ethernet data or link toSNMP or Web manager,or use to daisy-chainEthernet port to next LinkCX-24 in cascade7 ETHERNET 1Female 4-PinCircularConnector10/100Base-Ttransmit andreceivereceptacleEthernetequipment (Same as ETHERNET 2)PWR/LCL ALM Green LED Power/LocalAlarm StatusON = Power OK, no alarm,Flashing = Local alarm,OFF = Power off.RF LINK Green LED Radio LinkStatusON = Rcv. OK,OFF = Link Alarm.DATA Green LED DS-3 Status ON = OK (no LOS),OFF = LOS.ENET 2 Green LED Ethernet StatusON = OK,Flashing = data,OFF = No conn.8ENET 1 Green LED Ethernet Status--ON = OK,Flashing = data,OFF = No conn.
