Link CX-24 User’s ManualVersion 1.0 Page 37 February 2004The Link CX-24 is now mounted and aligned. Continue with Section 2.15 for acceptance tests.2.15 Acceptance TestingThis section describes the tests used to verify that the Link CX-24 data input circuitry, near-end Link CX-24 radio, radio link, and far-end Link CX-24 radio are installed properly and operating correctly.50 Verify that the physical installation is correct. Use Table 2.5 to sign off the individual checks.Table 2.5 – Physical Installation ChecklistChecklist Item Verified Inspector DateIs the mounting pipe securely connected to themounting structure?Is the Link CX-24 securely connected to themounting pipe?Is the lightning protection above the Link CX-24properly grounded?Is the Link CX-24 properly grounded?Is the lightning arrestor at the entry to theequipment enclosure properly grounded?Is all cabling to the Link CX-24 properly routed(no sharp bends and properly attached)?Are all exposed connectors properly sealedagainst moisture?Are all unused connectors capped off orotherwise sealed against moisture?Is the antenna polarization correct (as indicatedon the back of the unit)?51 Verify that the electrical connections are correct. Use Table 2.6 to sign off the individual checks.
