Yaesu FT-450 Operation Manual

Also see for FT-450: Brochure & specs Reference Manual User manual Technical supplement

Page 15FT-450 OPERATION MANUAL[F] button[DSP/SEL] knobHOW TO USE THE [DSP/SEL] KNOBEASY O PERATIONWhen a DSP function is not selected and no “>” iconis shown in the LCD Graphic Display, then turningthe [DSP/SEL] knob controls the frequency in VFOmode, or selects the memory channel in memorymode, or selects the menu item in memory mode. Inthe VFO Mode, briefly depressing the [DSP/SEL]knob will permit frequency adjustment in 100 kHzsteps (Default setting). (The 100 kHz operation maybe changed with the“SELDIAL” menu function.)When a DSP function is selected, the “>” icon willappear next to the function in the LCD Graphic Dis-play. Then pressing the [DSP/SEL] knob will switchthe DSP function on or off. When the DSP function ison, turning the [DSP/SEL] knob will change the func-tion parameters.ADVICE:You may change the function of the [DSP/SEL] knobvia menu item “SELDIAL”.MENU O PERATIONThe Menu System allows you to customize a wide variety of transceiver performance aspects and operatingcharacteristics. After you have initially customized the various Menu procedures, you will find that you will nothave to resort to them frequently during everyday operation.1. Press and hold the [F] button for one second toenter the Menu Mode. The “ ” icon will ap-pear on the display.2. Rotate the [DSP/SEL] knob to select the MenuItem to be adjusted.3. Press the [DSP/SEL] knob to enable adjustment ofthe selected Menu Item. The “ ” icon will blink.4. Rotate the [DSP/SEL] knob to adjust or selectthe parameter to be changed.5. Press the [DSP/SEL] knob to save the selection.The icon appears continuously.6. Press and hold the [F] button for one second toreturn to normal operation.Menu Item or Menu Setting[DSP/SEL] knob